Filter
Top Products
96 Maintaining the Projector
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menu.
1. Press the
Menu button on the remote control (or on the
projector’s control panel). You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
About, then press Enter.
You see this screen:
3. Select
Reset Lamp Timer, then press Enter. You see this
prompt:
4. Select
Yes, then press Enter.
5. When you’re finished, press
ESC or Menu to exit.
note
The lamp usage timer shows
0H until you’ve used the
lamp for at least 10 hours.
Video
Video
Audio
Audio
Setting
Setting
User's Logo
User's Logo
Advanced1
Advanced1
About
About
Reset All
Reset All
Frequency
Video Source
V ---.---Hz
Reset Lamp Timer
H ---.---kHz
Lamp 1400H
SYNC Mode
SYNC Polarity
------
V ------
H ------
Resolution
Refresh Rate ---.-- Hz
----x ----
Computer1
Computer1
Input Signal
:
:
:
:
:
:
:
: Analog-RGB
Execute
[ ]: Select
[ ]: Select
[ ]: Enter
[ ]: Enter
[Menu]: Exit
[Menu]: Exit
Effect
Effect
Advanced2
Advanced2
Lamp usage