Filter
Top Products
Managing the Projector from a Remote Computer 73
1
Managing the Projector from
a Remote Computer
Your projector’s EasyManagement software lets you monitor and
control your projector(s) from a remote computer. (The topics
covered in this chapter are intended for use by network
administrators.)
■ Use EMP Monitor to see your projectors’ status, switch image
sources, and control basic settings.
■ Use EMP NetworkManager to receive e-mail notifications
alerting you to possible problems.
To use the EasyManagement software, first install it as described on
page 74. Then connect and configure each projector you want to
monitor, so it can be recognized on your network (see page 76).
This chapter covers the following:
■ Installing the EasyManagement software
■ Configuring the projector to your network
■ Using EMP Monitor
■ Using EMP NetworkManager
note
You may also be able to
monitor your projector(s)
through a network
management utility, such as
HP OpenView.
™
You’ll
need to install a plug-in for
your system provided by
EPSON, then enter a trap
IP address using the
SNMP
option in the projector’s
menu system (see page 77).