Filter
Top Products
Note:
If you selected a country other than the United States in the Windows
Control Panel International utility, the default paper size may be
different. In addition, the measurement units displayed in the
printable area example (beneath the Paper Size box) may be metric.
Use one of the Centered paper sizes only if you want the image
to be centered on the page and your software program does
not have a setting that lets you do this. Centered images have a
slightly smaller printable area.
If you select User Defined, you can create a custom paper size
in the pop-up box that appears beneath the Paper Size box.
Change the current Paper Width and Paper Height settings to
the values you want.
Portrait or Landscape
Select either the Portrait or Landscape button to specify the
orientation of the image on the page. In portrait orientation, the
top of the page is parallel with the short edge of the paper. In
landscape orientation, the top of the page is parallel with the
long edge of the paper.
Normally you should select the page orientation in your
software application, not with the driver.
Paper Source
The default paper source is Auto Sheet Feeder. You may also
select Manual Sheet Feed, Manual Sheet Feed (Banner), or
Tractor Feeder.
If you are printing on paper longer than 23.4 inches (594 mm),
choose Manual Feed Slot (Banner) and set the top and
bottom margins to 0 (zero) or the minimum setting.
Installing and Using the Printer Driver
2-15