Filter
Top Products
44 Notices
Notices
Important Safety Instructions
Before using your EPSON Stylus CX6400, read and follow these safety instructions:
■ Be sure to follow all warnings and instructions marked on the Stylus CX6400.
■ Use only the type of power source indicated on the Stylus CX6400 label.
■ Connect all equipment to properly grounded power outlets. Avoid using outlets on
the same circuit as air control systems or other high-load devices that regularly switch
on and off.
■ Place the Stylus CX6400 near a wall outlet where the plug can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée
facilement.
■ Do not let the power cord become damaged or frayed.
■ If you use an extension cord with the Stylus CX6400, make sure the total ampere
rating of the devices plugged into the extension cord does not exceed the cord’s
ampere rating. Also, make sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet’s ampere rating.
■ Avoid electrical outlets controlled by wall switches or automatic timers.
■ Keep your Stylus CX6400 and computer system away from potential sources of
electromagnetic interference, such as loudspeakers or cordless telephone base units.
■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■ Leave enough room around the Stylus CX6400 for sufficient ventilation.
■ Do not place the Stylus CX6400 near a radiator or heating vent or in direct sunlight.
■ Place the Stylus CX6400 on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle. Leave enough space
in front of the Stylus CX6400 (at least 9 inches) so it doesn’t tip forward and fall off
of the work surface.
■ Turn off and unplug the Stylus CX6400 before cleaning. Clean with a damp cloth
only. Do not spill liquid on it.
■ Always turn the Stylus CX6400 off using the On button. Don’t turn off the power
using a switch on a power strip or unplug the Stylus CX6400 until the
On light is off.