Filter
Top Products
Q
If you have a composite color monitor, such as a color
television with a video input, try selecting CO1or
80x25.
If
YOU
find that the monitor’s resolution is poor,
run SETUP again and select
Color
40x25.
If you have two display adapters of different types, select the
setting for the one you want to be your primary display adapter.
The other one is your secondary adapter. A message appears at
power-on telling you whether you are currently using your
primary or secondary adapter.
Note
If you have installed an EGA or VGA display adapter card, or
another type of card that you want to be the primary display
adapter, you must set jumper J3 on the main system board to
disable the built-in VGA interface.
You also may need to set jumper J5 to tell the computer the
type of monitor you are using: either monochrome or color. If
you have two types of cards, set the jumper to match the
monitor that is your primary display. See Chapter 5 for
instructions on changing jumper settings.
Setting the Keyboard Test Function
There are two options for the keyboard: Installed or Not
installed. Select
Ins t
a 11 ed if you want the computer to test
the keyboard each time you turn it on or reset it. Select Not
insta1led
if you want the computer to skip the keyboard
test.
Running the Setup Program
2-9