Filter
Top Products
Chapter 5 Control Panel 80
Understanding default settings
This section describes the settings and options available in the
default-setting mode.
All items available in the default setting mode are divided into
three groups depending on the applications. You can select the
threemainmenuswhilemakingthedefaultsettingsandthen
change the setting of each item which belongs to the menu you
selected. On the Common Settings menu, you can change the
settings which are effective in all three application modes. On the
PR2Mode Settings menu, you can change the settings which are
active in the PR2 mode. Then you can change the settings active
in the ESC/P and IBM PPDS modes on the Other Emulation
Settings menu.
These settings are shown in the following tables and explained in
detail after the each table.
To access and change a setting, see “Changing default settings”
on page 94.