Filter
Top Products
The Cut Sheet Feeder
Testing the printer in the cut sheet feeder mode
When you perform the cut sheet feeder self test, the printer
counts the number of lines on the page and prints out this
number at the bottom of the first page, as shown on the next
page. The number of lines counted by the printer becomes the
default page length setting. This setting, however, can be
overridden by SelecType or by software commands.
The procedure for running the self test is the same as when the
cut sheet feeder mode is off.
1. Be sure a stack of paper is inserted in the selected bin of the
cut sheet feeder and that the printer is turned off.
2.
While holding down the LINE FEED button (draft mode) or
FORM FEED button (LQ mode), turn on the printer.
5-8 Using Printer Options