Filter
Top Products
Choosing paper
Because the SQ-850 and SQ-2550 are ink jet printers, paper
absorbency is especially important. With paper that is too
absorbent, the ink can spread slightly, causing characters to
blur. However, with paper that is not absorbent enough, the
ink may take too long to dry and can be smeared easily.
The finish and thickness of the paper is also important. Avoid
paper that has a rough finish or a slick, coated finish. Also
avoid paper that is too thick or too thin. See the paper
specifications section in Chapter 8 for more information.
Most correspondence quality paper works in the SQ-850 or
SQ-2550 without problems. It is, however, a good practice to
test the paper in your printer before buying in large quantities.
Also, you should test envelopes, preprinted forms, and labels.
To test a supply of paper, take a single sheet from the package
and load it in the printer. Perform the self test described in the
last chapter and check the results. (You can also run this test
with continuous paper.) You should also test both sides of the
paper to determine which gives you the best quality printing.
If the ink does not bleed or smear, the paper should be suitable
for use with your printer.
2-2 Paper Handling