Filter
Top Products
Commands Arranged by Topic
ESC U
Format:
Turn Unidirectional Mode On/Off
ASCII code: ESC U n
Decimal:
27 85 n
Hexadecimal: 1B 55 n
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
Printing is normally bidirectional. This command selects
unidirectional printing for more accurate positioning during
text printing. This setting can also be performed by
SelecType.
ESC EM
Cut Sheet Feeder Control
Format:
ASCII code:
ESC EM n
Decimal:
27 25 n
Hexadecimal: 1B 19 n
Comments:
The following values can be used for n:
1: Loads sheet from bin 1.
2: Loads sheet from bin 2.
R: Ejects a sheet. (No paper is loaded).
The command should not be used unless the cut sheet feeder
is installed. It is ignored if any value other than 1, 2, or R is
used for n.
The ON/OFF status of the cut sheet feeder mode and the
selection of bin 1 or 2 can also be selected by the PAPER
SELECT button.
9-10
Commend Summary