Filter
Top Products
Problem
Solution
The position of the sprocket units may
not match the width of the paper.
Position the right sprocket unit to
remove any excess slack across the
paper. Refer to 2-13.
The sprocket levers may be unlocked or
the sprocket covers may be open.
Position the sprocket units to match the
width of your paper then lock them in
place by pressing the sprocket lock
levers forward. Refer to 2-13.
Something may be obstructing your
paper supply. Make sure that the paper
can feed smoothly into the printer. Refer
to 2-8.
The position of your paper supply may
be preventing it from feeding straight
into the printer. Position the stack of
incoming new paper and outgoing
printed paper so that the paper feeds
straight. Refer to 2-8.
The supply of paper may be too far from
the printer. Position the paper supply so
that it is less than a meter away. Refer to
2-8.
Troubleshooting 7-17