Filter
Top Products
5-2
5-2 | Monitoring the Printer
In addition to checking the status of various components, you can use the
SelecType
™
menus on the printer’s control panel to configure printer
settings and perform maintenance operations. See the Appendix for more
information.
Pausing and Resetting the Printer
If you need to stop the printer during a print job, press the
Pause
button.
Press the
Pause
button again to resume printing.
If you decide to cancel a job after the printer has started processing it, you
can reset the printer. Press the
Pause
button and hold it down for 3 seconds.
This clears all data in the printer’s memory.
Monitoring Normal Printer Operation
Messages appear on the control panel display and lights come on or flash to
indicate various phases of printer operation. The following table explains the
status messages and lights:
Status messages
Message
Light Explanation or response
READY Operate light on Printer is ready to print.
PRINTING Operate light flashing Printer is receiving data.
INK DRY
<number> MIN
Pause light flashing Printer is paused to let ink dry.
Wait for the number of minutes
shown.
INK CHARGING
<number> %
Operate and Pause
light flashing
Printer is charging the ink delivery
system.
TRANSPORT PREP
<number> %
Operate light flashing Printer is draining the ink to
prepare for transport.
RESET All lights flash briefly Printer is resetting.
PRESS PAUSE
BUTTON
Pause light on Press the Pause button to
continue.
WAIT Pause light on or
flashing
Printer is warming up, initializing
or charging ink.
PAUSE Pause light on Printer is paused. To resume
printing, press the Pause button.