Epson Stylus Pro 7000 Printer User Manual


 
6-7
Maintaining and Transporting the Printer | 6-7
Replacing Ink Cartridges
When one of the
Ink Out
lights is flashing (and
INK LOW
is displayed on
the control panel), the corresponding cartridge is almost out of ink. Make
sure you have a replacement cartridge. When the light stays on and
INK
OUT
is displayed, the cartridge is empty. You must replace the cartridge
before you can continue printing.
Use the following EPSON ink cartridges:
Before you start, make sure the printer is on. Then follow these steps to
replace an ink cartridge:
1. Note the color of the
Ink Out
light that is on or flashing. This is the
cartridge that you need to replace.
2. Open the ink compartment cover.
Black T460011
Light cyan T465011
Cyan T463011
Light magenta T464011
Magenta T462011
Yellow T461011
Caution
For best results, use
genuine EPSON
cartridges and do not
refill them. Damage to
your printer attributable
to the use of other
consumables is not
covered by EPSON’s
warranty. Color accuracy
may vary considerably if
you use non-EPSON inks.
Caution
Leave the empty
cartridge in the printer
until you are ready to
replace it.