Epson WF-7510 All in One Printer User Manual


 
Problems and Solutions
33
Faxing Problems
Make sure the recipient’s fax machine is turned on and working.
Make sure the
LINE
port on the product is connected to a telephone wall jack. Verify
that the telephone wall jack works by connecting a phone to it.
Make sure the
Auto Answer
light is turned on to receive faxes automatically.
If your phone line includes voice mail answering services, calls or faxes may be
inadvertently received by your voice mail service.
If the line has static, press
Fax
, press x
Menu
, select
Communication
, and turn off
the
V.34
and
ECM
settings.
If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the filter.
If you connected a telephone or answering machine, make sure it is connected to the
EXT.
port. Do not use a phone line splitter.
Print Quality Problems
Make sure your paper is loaded printable side down (usually the whiter, brighter, or
glossy side).
For the best print quality, use Epson papers (see page 4) and genuine Epson ink
cartridges (see page 25).
Make sure the type of paper you loaded matches the paper type setting on the control
panel or in your printer software (see page 16).
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 22) to see if the print head needs cleaning.
If you notice jagged vertical lines, you may need to align the print head. See the online
User’s Guide for instructions.
The ink cartridges may be low on ink. Check your cartridge levels (see page 24) and
replace cartridges, if necessary (see page 25).
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if necessary. Do
not spray glass cleaner directly on the glass.
Masuo_Masuo-P2_QG.book Page 33 Thursday, June 30, 2011 3:53 PM