Filter
Top Products
Functions for Enhancing Projection
46
Setting the Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
Procedure
A Press the [Menu] button, and select Image - Auto Iris from
the configuration menu.
B Select On.
The setting is stored for each Color Mode.
C Press the [Menu] button to close the configuration menu.
Auto Iris can be set only when the Color Mode is Dynamic, The-
atre, or Customized.
When Multi-screen is set to On, Auto Iris does not work.
Hiding the Image Temporarily (Shutter)
You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Procedure
Each time you press the buttons, the electric shutter closes or opens.
When the shutter is closed and no operations are performed for about
120 minutes, the projector enters Sleep Mode and turns off
automatically. If you do not want Sleep Mode to activate, change the
Shutter Timer setting to Off from Operation in the Extended menu.
If you press [t] button while the shutter is closed, the shutter
automatically opens and a message requesting confirmation to turn off
the power is displayed on the screen.
Using the Remote Control Using the Control panel
Using the Remote Control Using the Control panel