Filter
Top Products
List of Functions
92
Others Menu
Sub Menu Function
Trap IP Address 1/Trap IP
Address 2
You can register up to two for the SNMP
g trap notification destination.
You can input a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be
managed by a network administrator.
Priority gateway For the priority gateway, select either Wireless LAN or Wired LAN.
AMX Device Discovery When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery
g. Set
this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.