List of Functions
81
Soft keyboard operations
The Network menu contains items that require input of alphanumerics during setup. In this case, the following software keyboard is displayed. Use the
[h] button on the remote control or [w/], [v/], [</ ], and [>/ ] on the projector to move the cursor to the desired key, and then press the
[Enter] button to enter the alphanumeric. Enter figures by holding down the [Num] button on the remote control, and pressing the numeric buttons. After
inputting, select Finish on the keyboard and press [Enter] to confirm your input. Select Cancel on the keyboard and press [Enter] to cancel your input.
A
Each time this key is selected, it sets and changes between upper case and lower case letters.
B
Each time this key is selected, it sets and changes the symbol keys for the section enclosed by the frame.