Filter
Top Products
Limitation of the Number of the Target Projectors when Using Multiple Projectors
56
Setting the Projector ID
Procedure
A During projection, press the Menu button and select
Extended - "Projector ID" from the configuration menu.
B Choose the ID you want to set and press the Enter button.
C Press the [Menu] button to close the configuration menu.
Checking the Projector ID
Use the following procedure to check the projector ID.
Procedure
A Set the remote control ID switch to On.
B During projection, while holding the [ID] button, press the
[Help] button.
When you press the buttons, the current Projector ID is displayed
on the projection screen. It disappears in about three seconds.
Using the Remote Control Using the Control panel
Remote Control