EVGA 122-M2-NF59-AX Computer Hardware User Manual


 
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 35
Memory Configuration
Optimized for nForce Mem
Enable memory settings that are Optimized for nForce (only functional with DRAM that is
Optimzed for nForce).
Memory Timings
Use this menu to control memory timings (see Memory Timings section below)
Drive Strength setting
Use this menu to control drive strength settings (see Drive Strength settings section below)
Dram on-die termination
Resistance of the on-die termination resistors
Read/Write queue bypass
Number of times to bypass the read/write queue
Bypass Maximum
Max number of times that the oldest memory access request can be bypassed
32 Byte Granularity
32/64 byte DRAM access granularity
NVMEM memory test
Run NVIDIA memory testing module during POST
DQS Training Control
Perform/Skip DQS training
CKE base power down mode
Enable/Disable CKE base power down mode
CKE power down control
CKE power down mode selection. It should be set to “per channel” for non mobile systems.
Memclock tri-stating
Memclock tri-stating during C3 and Alt VID
Memory Hole remapping
Enable/Disable memory hole remapping
Auto Optimize Bottom IO
Auto optimize maximum DRAM size when kernel assigns PCI resources done.
Memory Timings