Filter
Top Products
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 58
DRIVER INSTALLATION
After your computer’s Operating System is installed, you will need to install
drivers for your motherboard in order to gain full operation. Insert the Driver
Installation CD into your computer’s CD or DVD ROM drive and allow the
autorun function to bring up the installation menu.
If the autorun function is disabled on your computer, simply navigate to the CD
or DVD ROM drive that the Driver Installation CD is located in and double-click
the autorun.exe file.
From the installation menu choose the following options that will install the
following drivers:
• NVIDIA Motherboard Drivers
• Audio Driver
After your computer finishes this installation, it will need to reboot in order for
the new drivers to take effect.
NOTE: If you are installing drivers under the Windows XP x64 operating
system, please explore the Driver CD and navigate to \Drivers\NFORCE
64Bit\Chipset and run setup.exe.
RAID INSTALLATION
The drivers for the NVIDIA RAID controller are located on the included RAID
DRIVER floppy disk. They can be installed either at the time of Operating
System installation or after the operating system has already been installed on
a conventional IDE drive.
It is important to note that before you install and configure a RAID system,
either after OS installation or during, you will need to enable RAID in your
motherboard BIOS. To do this, reboot the computer and press the <Delete>
key as it starts, this will take you to the BIOS configuration screens. From there
you will need to make changes as indicated in the BIOS PDF that you can find
in the Manuals Section of the Installation CD.
If you wish to install the SATA/RAID drivers at the same time you are installing
the Operating System, simply wait for the Windows Installer to display “Press
F6 if you need to install a third party SCSI or RAID driver….” - and press
F6 at that time. Then insert the floppy disk and follow all of the on-screen
instructions.
NOTE: The included floppy disk with RAID drivers supports Windows XP
(32 bit version) and Windows 2000 only. If you are installing RAID under
Windows XP x64, you will need to make a RAID driver disk. We have
made this very easy to do, simply follow the instructions listed below: