Filter
Top Products
Power Connector
The power connector used in the tape drive is compatible with the
power connector used for standard 5.25-inch, half-high devices.
Figure 6-1 shows the location of the power connector on the rear of
the tape drive and the pin assignments.
Table 6-8 lists the pin assignments for the power connector.
Pin Number Assignment
1 +12 VDC
2 Ground, 12 VDC return
3
Ground, 5 VDC return
4 +5 VDC
To connect the tape drive to a power cable, use an AMP 1-480424-0
series or equivalent female connector.
Figure 6-1 Power connector location on the back panel
Table 6-8 Power connector pin assignments
May 1994 EXB-8205 and EXB-8505 6-13
(Standard and XL)
6 Functional Specifications