Filter
Top Products
Vibration Specifications
Table 6-13 lists the vibration specifications for the tape drive during
operation, non-operation, storage, and transportation. The operating
specifications listed in this table indicate the amount of vibration that
the tape drive can withstand while reading and writing data.
Random vibration
a
applied during operation
1Hz PSD=0.000003g
2
/Hz
5 Hz PSD = 0.00002 g
2
/Hz
10-150 Hz PSD = 0.0003 g
2
/Hz
200-400 Hz PSD = 0.00008 g
2
/Hz
Random vibration
b
applied during non-operation
c
and storage
d
1Hz PSD=0.0003g
2
/Hz
3 Hz PSD = 0.00055 g
2
/Hz
12-100 Hz PSD = 0.01 g
2
/Hz
400Hz PSD=0.000003g
2
/Hz
Transportation
d
NSTA Project 1A
a
A 0.3 g RMS random vibration spectrum is applied to each of three orthogonal axes
for a minimum of 20 minutes per axis.
b
A 1.06 g RMS random vibration spectrum is applied to each of three orthogonal
axes for a minimum of 20 minutes per axis.
c
The tape drive has been unpacked, but is not operating.
d
The tape drive has not been unpacked.
Table 6-13 Vibration specifications
May 1994 EXB-8205 and EXB-8505 6-19
(Standard and XL)
6 Functional Specifications