Filter
Top Products
Back Panel Components
Figure 1-4 shows the back panel of a single-ended tape drive. The
differential tape drives look similar except that there are no SCSI
terminator R-packs (resistor terminators).
Ground Tab and Grounding Hole
The tape drive includes a ground tab and grounding hole to use if
you want additional chassis grounding. See Chapter 6 for more
information.
SCSI Connector
The 50-pin SCSI connector on the tape drive allows you to connect the
tape drive to the SCSI bus. Pin 1 is the first pin on the right side of the
top row.
See Chapter 5 for more information about connecting the tape drive to
the SCSI bus.
Power Connector
The 4-pin power connector on the tape drive is compatible with the
power connector used for standard 5.25-inch half-high devices. See
Chapter 6 for more information.
Figure 1-4 Back panel (single-ended configuration)
May 1994 EXB-8205 and EXB-8505 1-11
(Standard and XL)
1 Features