Filter
Top Products
Upgrading Firmware
The Firmware Upgrade page lets you browse to locate and upload a new version of firmware
for your unit. The uploaded file must have the file extension .S19.
NOTE: The PC1 uses the same firmware as the IPL T PC1. However, it does not accept
other firmware files, such as the .s19 files for the IP Link S Series.
To find out the version of firmware that is currently loaded on your PC1, see “Firmware:” in
the System Description section of the System Status page.
Downloading the firmware from the web
To obtain the firmware file to load to your PC1:
1. Visit the Extron website (www.extron.com).
2. Click the Download tab.
3. On the Download Center page, click the Firmware link at the top of the left sidebar
menu.
4. On the Archives line at the top of the Firmware page, click the letter I.
5. On the next page that appears, click the Download link at the right end of the IPL T PC1
or IPL T PC1i line.
6. Fill in the required information on the next Download Center page, and click the
Download IPLTPC1 button.
7. Click Run on the File Download window.
8. Follow the instructions on the installation wizard screens. The new firmware file is
placed on your computer internal disk.
Updating the firmware
To upload a new version of firmware:
1. On the sidebar menu of the Configuration page, click Firmware Upgrade. The Firmware
Upgrade page is displayed, showing the version of rmware that is currently loaded.
Figure 24. Firmware Upgrade Page
IPL T PC1 • HTML Configuration and Control 32