Filter
Top Products
Scheduling output receptacle power
To schedule power on and off to the output receptacle:
1. In the Receptacle 1 section, click On or Off to select the power setting that you want
to schedule for the week. A Set Schedule For section appears above the Scheduling
section, displaying the receptacle number (always 1, for PC1/PC1i), the power selection
you clicked (On or Off), and menus from which to select the hour, minutes, and am/pm.
The illustration below shows the Set Schedule For section, with Power On scheduled for
6:00 am Monday through Friday.
Figure 27. “Set Schedule For” Section, Displayed for Receptacle 1
2. From the drop-down menus, select the time (hour, minutes, and am or pm) at which
you want power turned on or off.
3. Select the check boxes for the days of the week you want the receptacle to be turned
on or off at the time you specified.
4. When nished, click Set to save your settings and close the Set Schedule For section.
The settings you entered appear in the Current Schedule in the Receptacle 1 section.
5. Repeat steps 1 through 4 for any additional power settings you want to make.
IPL T PC1 • HTML Configuration and Control 35