Filter
Top Products
Operation, cont’d
Integration Scaling Matrix Switcher • Operation3-8
From any menu or submenu, after 10 seconds of inactivity, the ISM saves all
adjustment settings and times out to the default LCD display cycle.
Video & Audio Configuration menu
Figure 3-8 is a flowchart that shows an overview of the Video & Audio
Configuration menu and the available settings.
Input video type
• RGB • Betacam 60
• RGBcvS • HDTV
• YUVi • S-video
• YUVp • Composite
• Betacam 50
Input audio level
-24dB to +9dB
Input Configuration:
Select an input to configure
by pressing an Input button.
Rotate the knob to select
the video type.
Rotate the knob to select
the audio level.
NOTE The audio is broken
away in this example.
Default
Cycle
Menu
Menu
Next
10 sec. 10 sec.
Video & Audio
Configuration
Video/Audio Config
Input #1 Composite
Audio #3 Level -12db
Menu
Output
Configuration
Menu
Advanced
Configuration
Menu
User Presets
Menu
Next
Exit Menu
Press Next to Exit
1
1
Input Configuration:
If necessary, select
another input and
repeat.
2
2
Next
Menu
Figure 3-8 — Input Configuration menu flowchart
Input Configuration submenu
Select an input to configure by pressing and releasing an input button. Rotate the
Adjust
knob while in the Input Configuration submenu to select the correct
video format (RGB, RGBcvS, YUVi, YUVp, Betacam 50, Betacam 60, HDTV, S-video,
or composite video) for the selected input. Rotate the Adjust knob to select the
audio gain or attenuation value, from -24 dB to +9 dB. The default for each input is
RGB video and a 0 dB audio level.