Filter
Top Products
Installation, cont’d
Integration Seamless Switcher • Installation2-8
RS-232 connection
10
Remote port — Connect a host device, such as a computer or touch panel
control, to the Integration Seamless Switcher via this 9-pin D connector for
serial RS-232 control (figure 2-9).
RS-232 FunctionPin
1
2
3
4
5
6
7
8
9
—
TX
RX
—
Gnd
—
—
—
—
Not used
Transmit data
Receive data
Not used
Signal ground
Not used
Not used
Not used
Not used
51
9
5
9
6
Female
Male
1
6
Figure 2-9 — Remote port pin assignments
See chapter 4, Programmer’s Guide, for definitions of the SIS commands and
chapter 5, Switcher Software to install and use the control software.
Configuration
The ISS can be configured using either the front panel controls, the SIS, or the
Windows Control program. See chapter 3, Operation, chapter 4, Programmer’s Guide,
and chapter 5, Switcher Software.