Filter
Top Products
Programmer’s Guide, cont’d
Integration Seamless Switcher • Programmer’s Guide4-12
Command/response table for SIS commands (cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Vertical detail filter (RGB and component video inputs)
The vertical detail filter is available only for RGB and component video inputs.
The
X2
value specified is the output to which the filtered input is switched.
The command (d) is case sensitive.
Set a specific filter value
X2
*
X18
d
X2
Dvz
X18
Set the vertical detail level.
Increment filter value
X2
+d
X2
Dvz
X18
Increase the vertical detail level.
Decrement filter value
X2
-d
X2
Dvz
X18
Decrease the vertical detail level.
View the vertical filter value
X2
d
X18
Show the vertical detail level.
Detail filter (S-video and composite video inputs)
Composite and S-video inputs support a single detail filter only, rather than separate horizontal and
vertical filters. To apply a detail filter to the scaled output when the input is composite video or
S-video, use the same command as the horizontal filter (D) with the
X18
variable.
The
X2
value specified is the output to which the filtered input is switched.
Set a specific filter value
X2
*
X18
D
X2
Dvz
X18
Set the detail filter level.
Increment filter value
X2
+D
X2
Dvz
X18
Increase the detail filter level.
Decrement filter value
X2
-D
X2
Dvz
X18
Decrease the detail filter level.
View the vertical filter value
X2
D
X18
Show the detail filter level.
Auto Memories
Auto memories on 1M Aut
X3
Set the ISS to apply auto
memories settings to all inputs as
selected.
Auto memories off 0M Aut
X3
Set the ISS to not apply auto
memories settings.
View auto memories status M
X3
Auto memories is
X3
(on or off)
for all inputs.
User presets
The
X2
value specified is the output to which the input with the associated user preset is switched.
Save user preset
X2
*
X19
, Spr
X2
•
X19
Command code is comma. Save
the
X2
outputs settings as preset
X19
.
Recall user preset
X2
*
X19
. Rpr
X2
•
X19
Command code is period. Recall
preset
X19
settings for
X2
output.
Freeze
Enable
X2
*1F
X2
Frz1 Output a “frozen” video image.
Disable
X2
*0F
X2
Frz0 Turn off freeze (output motion
video).
View the freeze status
X2
F
X3
Show the freeze status.
Example:
X2
F0 Freeze mode off.
Test pattern
Select test pattern for an output
X21
*
X22
JTst
X21
*
X22
Select a test pattern for the
X21
output(s).
View test pattern J
X21
*
X22
Show the test pattern.
Example: j 3*002 Crosshatch test pattern selected
for both outputs.