Filter
Top Products
4-17Integration Seamless Switcher • Programmer’s Guide
Command/response table for special function SIS commands (cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Auto Image
Set Auto Image
X3
*13# Img
X3
00 = off.
01 = on.
Example: 1*13# Img01 Set Auto Image on.
Execute Auto Image
X18
*14# Img
X18
X18
: Auto Image input tied to
output:
Prog/Prev Prog/Prev
01 = Yes/No 03 = Yes/Yes
02 = No/Yes
X2
Reconfig Output
X2
Auto Image complete.
X2
Reconfig Output
X2
Auto Image complete.
If Auto Image adjustments are not necessary for an input, the
X2
Reconfig message may not be
received.
If both outputs are receiving the same input, both outputs are auto imaged regardless of the
X18
received.
PAL film mode
Set PAL film mode
X1
*
X3
*18#
X1
Flm
X3
X3
: 0 = off.
1 = on.
Example: 8*1*18# 8Flm01 The ISS uses its 2:2 pulldown
(PAL) video processing
algorithms to scale input 8.
Read PAL film mode
X1
*18#
X3
0 = off.
1 = on.
Preview switch mode
Set preview switch mode
X26
*20# Psm
X26 X26
: 0 = stay mode.
1 = swap mode.
Example: 1*20# Psm01 The ISS swaps the preview and
program outputs when you
perform a cut or dissolve
operation.
Read preview switch mode 20#
X26
0 = stay mode.
1 = swap mode.