Filter
Top Products
3-3Integration Seamless Switcher • Operation
4
Cut button — Pressing the Cut button causes the ISS to immediately switch
the input selected as the preview output to the program output, with no
switching effects added. If black screen and/or mute audio is selected for the
program output, it is deselected when a cut is selected.
Dissolve button — Pressing the Dissolve button causes the ISS to switch the
input selected as the preview output to the program output using the dissolve
effect. If black screen and/or mute audio is selected for the program output,
it is deselected when a dissolve is selected.
5
Input label panel — This translucent panel can be removed and replaced to
insert a label behind the panel. To remove the panel, insert the Philips-head
end of an Extron Tweeker or small Philips-head screwdriver into the hole in
one end of the panel, and gently slide the tab on the edge of the panel out of
the recess in the switcher housing.
Input labels can be created easily with Extron’s button label generator
software, which ships with every Extron ISS, or with any Brother
®
P-Touch™
labeler. Each input can be labeled with names, alphanumeric characters, or
even color bitmaps for easy and intuitive input and output selection
(figure 3-3). See chapter 5, Switcher Software, for details on using the label
software.
Rack DVD
(DVS 100)
12345678
12345678
INPUTS
Figure 3-3 — Sample label
Picture adjustment and menu system controls
6
Picture Adjustment buttons and LEDs — The picture adjustment buttons
select individual image adjustments that are adjusted using the Adjust
and
Adjust
knobs (
9
). The LEDs above these buttons light when the button is
pressed.
Color/Tint control button — The Color/Tint button selects the display color
and tint adjustments. The color adjustment range is from 0 to 127. The tint
adjustment range is from 0 to 255. See Picture adjustments in this chapter.
The Color/Tint control affects only composite video and S-video inputs.
Brightness/Contrast control button — The Brightness/Contrast button
selects the display brightness and contrast adjustments. The adjustment
range for both brightness and contrast is from 0 to 63. See Picture adjustments
in this chapter.
Size control button — The Size button selects the display size adjustment.
The adjustment range depends on the output resolution selected. See Picture
adjustments in this chapter.