Filter
Top Products
IPL T SF24 and IPL T SFI244 • Communication and Control
IPL T SF24 and IPL T SFI244 • Communication and Control
Communication and Control, cont’d
4-254-24
Command ASCII (Telnet) URL Encoded (Web) Response
IP Setup Commands
Set Unit name
24
Esc
X12
CN W
X12
CN| Ipn•
X12
Set Unit name to factory default
24
Esc •CN W%20CN| Ipn•
X49
Read Unit name Esc CN WCN|
X12
Set time/date
24
Esc
X13
CT W
X13
CT| Ipt•
X13
Read time/date Esc CT WCT|+
X13
Set GMT offset
24
Esc
X3
CZ W
X3
CZ|+ Ipz
X3
Read GMT offset Esc CZ WCZ|
X3
Set daylight savings time
24
Esc
X34
CX W
X34
CX| Ipx
X34
Read daylight savings time Esc CX WCX|
X34
Set DHCP on
24
Esc 1DH W1DH| Idh 1
Set DHCP off
24
Esc 0DH W0DH| Idh 0
View DHCP mode Esc DH WDH|
X5
Set IP address
24
Esc
X14
CI W
X14
CI| Ipi•
X14
Read IP address Esc CI WCI|
X14
Read hardware address (MAC) Esc CH WCH|
X18
Set subnet mask
24
Esc
X19
CS W
X19
CS| Ips•
X19
Read subnet mask Esc CS WCS|
X19
Set gateway IP address
24
Esc
X14
CG W
X14
CG| Ipg•
X14
Read gateway IP address Esc CG WCG|
X14
Set administrator password
24
Esc
X33
CA W
X33
CA| Ipa•
X33
Clear administrator password
24
Esc •CA W%20CA| Ipa•
Read administrator password
24
Esc CA WCA|
X33
Set user password
24
Esc
X33
CU W
X33
CU| Ipu•
X33
Command ASCII (Telnet) URL Encoded (Web) Response
IR/Serial Data port (SFI244 only)
Send IR command
28
Esc
X1
{file #}, {function#},
X59
IR Irs
X1
, {file#}, {function#},
X57
Get IR command info
28
Esc {file#}, {function#}, IR {description text}
Firmware Version/Part Number/Information
Query firmware version Q Q
X11
Query verbose version information 0Q 0Q sum of responses from 2Q-3Q-4Q
Query firmware version 1Q 1Q
X11
Query bootstrap version 2Q 2Q
X11
Query factory firmware version 3Q 3Q
X11
(plus web ver.-desc-UL date/time)
Query updated firmware version 4Q 4Q
X11
(plus web ver.-desc-UL date/time)
(Note: An asterisk (*) placed after the version number indicates which version is currently running. A question mark (?.??) indicates that
only the factory firmware version is loaded. A caret (^) after the version number indicates the firmware version that should be running, but a
Mode 1 reset was executed. The default factory firmware version is loaded. An exclamation point (!) after the version number indicates
corrupted firmware.)
Request part number N N 60-xxx-yy
Request model name 1I 1I IPL T SF24
or IPL T SFI244
Request model description 2I 2I Two Bi-Directional Serial Ports [RS232],
Four Flex I/O, Four IR Ports
Request system memory usage 3I 3I # Bytes/KBytes used out of # Kbytes
Request user memory usage 4I 4I # Bytes/KBytes used out of # Kbytes