Extron electronic TPX 88 A Switch User Manual


 
Quick Start — TPX 88 Matrix Switchers, cont’d
TPX 88 Matrix Switchers Quick StartQS-2
View button selects a view-only mode that prevents inadvertent configuration changes.
Esc button cancels selections in progress and resets the front panel LEDs. The Esc button does not
reset the current configuration, the Video and Audio LEDs, any presets, or any audio gain/
attenuation settings.
(TPX 88 A only) I/O button selects/deselects video and/or audio. The I/O button also selects the
audio level adjust mode.
(TPX 88 A only) Video and audio LEDs indicate that video and/or audio is selected for configuration.
(TPX 88 A only) Mute All button mutes and unmutes all audio outputs.
(TPX 88 A only) Volume knob adjusts the input level or output volume in audio level adjust mode.
Create a tie
1. Press and release the I/O button to select
audio and/or video.
2. Press and release the desired input button.
3. Press and release the desired output button(s).
4. Press and release the Enter button.
View ties
1. Press and release the View button.
2. Press and release the desired input.
3. Press and release the View button to exit view
mode.
Save or recall a preset
1. Save a preset — Press and hold the Preset
button for 2 seconds.
Recall a preset — Press and release the Preset
button.
2. Press and release the desired input or output
button.
3. Press and release the Enter button.
VIDEO
AUDIO
I/O
Press the button to cycle
through the selections.
Lights green when video is selected.
Lights red when audio is selected.
5
Amber indicates video and audio (audio follow).
Green indicates video only (audio breakaway).
Red indicates audio only (audio breakaway)
3 4 8
Amber indicates video and audio tie.
Green indicates video tie.
Red indicates audio tie.
I
N
P
U
T
O
U
T
P
U
T
VIEW
1 2
1 2
The buttons for all untied outputs light until you select an input.
Press the button to
select view mode.
The View LED lights when view mode is selected.
I
N
P
U
T
O
U
T
P
U
T
1 2
1 2
Press and release an input button.
The button lights.
The buttons for all tied outputs light.
The buttons for all untied outputs are unlit.
PRESETPRESET
PRESETPRESET
Preset LED blinks.Press and hold.
2 seconds
Save a
preset
Recall a
preset
Preset LED lights.Press and release.
I
N
P
U
T
O
U
T
P
U
T
1 2
1 2
ENTER
Press and release the input 1 button to select preset 1.
The button blinks.
Preset 9 Preset 10 Preset 11
Preset 2 Preset 3
The Enter button
blinks to indicate
the need to save or
recall the preset.