Filter
Top Products
4-5TPX 88 Matrix Switchers • Programmer’s Guide
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Command/Response Table for SIS Commands
Create ties
1. Commands can be made back-to-back, with no spaces. For example:
1*1!02*02&003*003%4*6$.
2. The quick multiple tie and tie input to all output commands activate all I/O switches
simultaneously.
3. The TPX supports 1-, 2-, and 3-digit numeric entries (1*1!, 02*02!, or 001*001!).
Tie input
X2
to output
X3
, video (V)
X2
*
X3
! Out
X3
•In
X2
•All Tie input
X2
’s video and audio
and audio (A) to output
X3
.
Example: 1*3! Out03 •In01•All Tie input 1 V & A to output 3.
Tie input
X2
to output
X3
, video only
X2
*
X3
& Out
X3
•In
X2
Vid Audio breakaway.
Example (see Note): 8*4& Out04•In08•Vid Tie input 8 video to output 4.
Tie input
X2
to output
X3
, video only
X2
*
X3
% Out
X3
•In
X2
•Vid Audio breakaway.
Example (see Note): 7*5% Out05•In07•Vid Tie input 7 video to output 5.
The & tie command and the % tie command can be used interchangeably for video on the TPX
switcher.
Tie input
X2
to output
X3
, audio only
X2
*
X3
$ Out
X3
•In
X2
•Aud Audio breakaway.
Example: 6*7$ Out07•In06•Aud Tie input 6 audio to output 7.
Quick multiple tie
Esc
+Q
X2
*
X3
!
…
X2
*
X3
!
Qik
Example:
Esc
+Q3*4!3*5!3*6! Qik Tie input 3 to outputs 4, 5, and 6.
Tie input to all outputs, V & A
X2
*! In
X2
•All
Example: 5*! In05•All Tie input 5 video and audio to all
outputs.
Tie input to all outputs, video only
X2
*& In
X2
•Vid
Example (see Note): 8*& In08•Vid Tie input 8 video to all outputs.
Tie input to all outputs, video only
X2
*% In
X2
•Vid
Example (see Note) : 4*% In04•Vid Tie input 4 video to all outputs.
The & tie all command and the % tie all command can be used interchangeably for video on the
TPX switcher.
Tie input to all outputs, audio only
X2
*$ In
X2
•Aud
Example: 1*$ In 01•Aud Tie input 1 audio to all outputs.
Read ties
Read video output tie
X3
&
X2
Video input
X2
tied to output
X3
.
Example:3&1Video input 1 tied to output 3.
Read video output tie
X3
%
X2
Video input
X2
tied to output
X3
.
Example:5%4Video input 4 tied to output 5.
The & read tie command and the % read tie command can be used interchangeably for video on
the TPX switcher.
Read audio output tie
X3
$
X2
Audio input
X2
tied to output
X3
.
Example:7$7Video input 7 tied to output 7.