Filter
Top Products
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Black signal for audio only
NOTE: The switcher uses a black signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal so audio can
be passed without video.
Enable black signal
EB1AFMT} AfmtBX$]
Enable a black signal for audio only.
Disable black signal
EB0AFMT} AfmtBX$]
Disable the black signal.
View black signal setting
EBAFMT} AfmtBX$]
View the black signal setting.
Picture Adjustment (Analog Only) Commands
Pixel phase
Set a pixel phase value
EX1@PHAS} PhasX1@] Adjust the pixel phase to X1@.
Increment value
E+PHAS} PhasX1@]
Increase the pixel phase value.
Decrement value
E-PHAS} PhasX1@]
Decrease the pixel phase value.
View pixel phase value
EPHAS} PhasX1@]
Show the pixel phase value.
Horizontal shift
Set horizontal shift value
EX1#HCTR} HctrX1#]
Set the horizontal location of the first
active pixel in the active window.
Increment value
E+HCTR} HctrX1#]
Increase the shift value.
Decrement value
E-HCTR} HctrX1#]
Decrease the shift value.
View horizontal shift value
EHCTR} HctrX1#]
Show the horizontal location of the
first active pixel in the active window.
Vertical shift
Set vertical shift value
EX1#VCTR} VctrX1#]
Set the vertical location of the first
active pixel in the active window.
Increment value
E+VCTR} VctrX1#]
Increase the shift value.
Decrement value
E-VCTR} VctrX1#]
Decrease the shift value.
View vertical shift value
EVCTR} VctrX1#]
Show vertical location of the first
active pixel in the active window.
Auto-Image
Execute Auto-Image
1A
Aadj1
]
Execute a one time Auto-Image for
input 1.
Preset Commands
Input presets
Save an input preset
X1$, SprX1$]
Save the current configuration to
preset X1$.
Recall an input preset
X1$. RprX1$] Recall the preset X1$ configuration.
NOTE: X$ = Enable or disable 0 = disable
1 = enable
X1@ = Pixel phase 0-255 (128 = default)
X1# = Horizontal or vertical shift 0-65535 (32768 = default)
X1$ = Preset number 1-8
XTP T USW 103 • SIS Configuration and Control 17