Filter
Top Products
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Test pattern
Set a test pattern
X1)J TstX1)]
Set or disable a test pattern.
View the current test pattern
J
Tst
X1)]
View the current test pattern.
Status
View input signal presence
0LS
Frq
X2@X2@X2@]
View the input signal presence of
each input.
Query HDCP input
EIHDCP} HdcpI0X2! X2!]
View the HDCP input status of
inputs 2 and 3.
Query firmware version
Q
x.xx
]
View the firmware version.
Query full firmware version
*Q
x.xx.xxxx
]
View the full firmware version.
Query part number
N
60-1198-01
]
View the device part number.
Factory defaults
System Reset
EZXXX} Zpx]
Resets unit to factory default.
NOTE: X1) = Color bar test pattern 0 = disable (default)
1 = 720p @ 50 Hz
3 = 720p @ 60 Hz
5 = 1080p @ 60 Hz
X2! = HDCP status 0 = no source connected
1 = HDCP compliant source
2 = non-HDCP compliant source
X2@ = Video signal status 0 = video or TMDS not detected
1 = video or TMDS detected
XTP T USW 103 • SIS Configuration and Control 19