Filter
Top Products
Using the XTP System Configuration Software
The XTP T USW 103 can be controlled directly from the front panel config port or remotely
from an XTP matrix switcher.
Connections
When opening the XTP System Configuration Software, the Connections screen opens
first. This screen is used to establish communication with an XTP device through a USB
connection (see Config port on page 10).
Figure 13. Connections Screen
1. From the Connections screen, select the USB radio button.
2. From the displayed list, select the connected device to be controlled.
3. Click the Connect button.
XTP T USW 103 • XTP System Configuration Software 21