Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
5-63
Using the Defined Area Option (continued)
Step Procedure
6
a. Determine whether to use the Frontside option (via the Front radio button) or
the Backside option (via the Back radio button).
b. Use the Defined Area arrows to navigate back and forth from area to area in
the Frontside or Backside area. (Note: The active area will always be
highlighted with a dotted outline.)
c. Define another area by clicking on the Defined Area UP arrow.
Another .2" x .2" / 5mm x 5mm area will appear in the lower left-hand
corner. (Note: This is the location in which all newly defined areas will
first appear.)
Up to 5 areas can be defined; however, additional areas cannot be added
until the most recently created area has been moved or sized. (Note: For
this reason, size and position each area as it is created.)
d. Delete an area by using the Defined Area arrows to select the area and click
on the Delete button. (Note: If all areas are deleted, the K Panel Resin
options will automatically be deselected.)