Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
4-9
Resolving a Ribbon RFID Error (Ribbon RFID Antenna is Corrupted)
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
Symptom: Printer RFID Sensor does not detect a recognizable signal from
the Ribbon.
Printer Error State: The Ribbon tag information is corrupted or incorrect.
Driver Monitor Error Display: Ribbon RFID Error