Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2)
15-3
ISO, 14-10
ISO 7811-2 Magnetic Stripe, 5-47
ISO encoded data format, 5-40
ISO Standard selections, 5-45
ISO Standard settings, 5-38
ISO Track Locations, 5-47
J
JIS II (Japanese Industrial Standard), 14-10
K
K Panel, 14-10
K Panel Resin options, 5-63, 5-87
K Panel Resin tab, 5-77
L
Lamination, 14-10
Lamination Drive, 9-2
Lamination Drive Stepper, 9-2
Lamination Roller Lift, 9-2
Lamination Sensor Calibration, 4-53
LAN (Local Area Network), 14-10
Landscape, 14-11
Landscape orientation, 5-33
LCD (Liquid Crystal Display), 14-11
LED (Light Emitting Diode), 14-11
less heat / more heat, 5-29, 5-30
LoCo (Low Coercivity), 14-11
LPT Port (Line Printer Port), 14-11
LRC Generation, 5-45
LRC Generation Mode, 5-45
M
magnetic data, 5-100
Magnetic Encoder, 4-16
Magnetic encoding, 14-11
Magnetic Offset option, 5-100
Magnetic Offset value, 5-100
Magnetic stripe, 14-11
Magnetic Stripe Encoding Module, 5-37
Magnetic Stripe reader, 4-13
Magnetic Track, 14-11
Magnetic Track Options, 5-38
Magnetic Track Selection, 5-38, 5-39
Magnetic Track Selection option, 5-38
Magnetic Verify, 14-11
maximum adjustment range, 5-95, 5-100
MB (Megabyte), 14-12
Media, 14-11
Memory, 2-3, 14-12
Menu, 14-12
Metallic Resin, 2-8
Monitor, 5-20
Monochrome, 14-12
Monochrome Dye-Sub (B), 4-53
Monochrome Resin (K), 4-53
Motor Voltages (when active), 9-2
Multi-Language Extension (MLE), 5-43
N
Network, 14-12
None, 5-20
O
Oersted (Oe), 14-12
Offset, 14-12
Omit Signature Area setting, 5-60
On LED, 4-52, 4-54
onscreen card design, 5-83
Operating Temperature, 2-3
optional Magnetic Stripe Encoding Module, 5-37
O-Ring, 14-12
OS (Operating System), 14-12
Output, 14-12
Output Hopper, 14-12
Overlaminate, 14-13
Overlay, 14-12
Overlay / Print Area, 5-60, 5-61
Overlay / Print Area options, 5-57
Overlay / Print Area tab, 5-51
Oversized Cards, 14-13
P
Parallel, 14-13
Parallel port, 14-13
Pause button and LED, 2-6
Pause/Resume button, 4-52, 4-54
PC (Personal Computer), 14-13
PCB (Printed Circuit Board), 14-13
Peel, 14-13
Peel-Off, 14-13
Peripheral, 14-13
PET, 14-14
Photo, 5-21
Pinch Roller, 14-14
Pixel, 14-14
Platen, 14-14
PolyGuard Overlaminate, 14-14
poor image quality problems, 4-49, 4-50
Port, 14-14
Portrait, 14-14
Portrait or Landscape, 5-7
Portrait, Landscape or Rotate 180 Degrees, 5-33
positive / negative Print Length value, 5-95
POSITIVE / NEGATIVE value., 5-94
Potentiometer, 14-14
Power Port, 2-6
power/data cables, 4-34
Premium Resin Black (K), 2-8
prevents magnetic encoding, 5-43
Print All Black With K Panel, 5-77
print and overlay, 5-51
Print Back Side First option, 5-24
Print back side only, 5-25
print both sides, 5-22, 5-23
Print Both Sides option, 2-12, 5-23, 5-25