Filter
Top Products
FS-8700-84_Lutron_eLumen Driver Manual Page 23 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
4.1.29. System Control Commands containing no Parameters: Timeclock new schedule
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, DA_Lut_List, DA_Lut_List_Offset, Length
Tck_new_sched, Lut_triggers, 12, awt, LUT_GRF6_0, tclk_new_schedule, Clk_sched, 0, 1
DA_Lut_List data setup
Position from DA_Lut_List_Offset Description
0 Area tclk 0
1 Schedule 0
2 Area tclk 1
3 Schedule 1
.. ..
60 Area tclk 30
61 Schedule 30
62 Area tclk 31
63 Schedule 31
Note: 1 to 32 new schedules may be started by this command. To trigger this command, write the number of area timeclocks into the Data Array
specified by Data_Array_Name at Data_Array_Offset.
4.1.30. System Control Commands containing no Parameters: Set timeclock
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, DA_Lut_List, DA_Lut_List_Offset, Length
Set_tck, Lut_triggers, 13, awt, LUT_GRF6_0, set_tclk, Set_tclk, 0, 1
DA_Lut_List data setup
Position from DA_Lut_List_Offset Description
0 Hour ( 0-23 )
1 Minutes ( 0-59 )
2 Month ( 1-12 )
3 Day of month ( 1-31 )
4 Year ( 0 – 99 )
5 Day of week ( 1-7, 1=Sunday )