Filter
Top Products
FS-8700-84_Lutron_eLumen Driver Manual Page 32 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
4.1.45. System Control Commands Containing Parameters: Set system variable value
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, DA_Lut_List, DA_Lut_List_Offset, DA_Lut_Parms, DA_Lut_Parms_Offset, Length
Set_sys_var, Lut_triggers, 28, awt, LUT_GRF6_0, set_sys_var_val, Var_list, 0, Var_pars, 0 1
DA_Lut_List setup
Position from DA_Lut_List_Offset Description
0-31 System variable numbers
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset Description
0 New value
4.1.46. Listening to switch presses and releases: Enabling switch presses and releases reporting
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, length
Ena_sw_lsn, Sw_lsn_trigger, 0, awt, LUT_GRF6_0, enable_sw_listen, 1
Note: To enable the reporting of switch presses and releases, write any value into the Sw_lsn_trigger Data Array at offset specified by
Data_Array_Offset.
4.1.47. Listening to switch presses and releases: Disabling switch presses and releases reporting
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, length
Dis_sw_lsn, Sw_lsn_trigger, 1, awt, LUT_GRF6_0, disable_sw_listen, 1
Note: To disable the reporting of switch presses and releases, write any value into the Sw_lsn_trigger Data Array at offset specified by
Data_Array_Offset.