ALARM SET SETTINGS
Use the cursor button to select
ALARM LIST “ON”.
The number of the camera where the
alarm was detected, the date, time and the
type of alarm are recorded in the alarm list.
Display examples:
• OFF: Alarm list is not recorded.
• ON: Alarm list is recorded.
Use the cursor button to select
BUZZER “ON”.
The buzzer will sound when an alarm is
detected.
Display examples:
• OFF: The buzzer does not sound when an alarm is detected.
• ON: The buzzer sounds when an alarm is detected.
Note: The alarm buzzer sounds from the front panel of the
multiplexer. If setting the buzzer to sound, place the
multiplexer so that the buzzer sound can be heard from
the multiplexer.
ALARM SET-2
+–
7
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION 10 S
RETRIGGER ON
ALARM LIST ON
BUZZER ON
ALARM DISPLAY ¤
+–
8
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION 10 S
RETRIGGER ON
ALARM LIST ON
BUZZER ON
ALARM DISPLAY ¤
Example: To set the alarm duration
• 3 seconds for cameras 01 and 05
Use the cursor button to select
DURATION “10S”.
Use the setting buttons to select
“INDIV.”, and then press the NEXT
button.
The ALARM DURATION SET screen will
be displayed.
Use the cursor button to select
“01:10S”, and then press the setting
buttons to change the setting to
“3S”.
Use the same procedure to set the alarm
duration for cameras 02, 03, 04 and 05.
Press the MENU button.
The display will return to the camera image
display screen.
When an alarm is detected at the cameras
that have been set, an alarm is displayed
for the setting duration.
Example of alarm duration display
ALARM SET-2
1
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION 10 S
RETRIGGER ON
ALARM LIST ON
BUZZER ON
ALARM DISPLAY ¤
NEXT
+–
2
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION INDIV.*
RETRIGGER ON
ALARM LIST ON
BUZZER ON
ALARM DISPLAY ¤
(*:NEXT)
+–
3
(ALARM DURATION SET)
IN IN
01: 3 S 09:10 S
02: 3 S 10:10 S
03: 3 S 11:10 S
04: 3 S 12:10 S
05: 3 S 13:10 S
MENU
4
Cameras 01 to 05
Alarm displayed
for 3 seconds
ALARM SET-2
– 62 –
English