Filter
Top Products
SECURITY SET SETTINGS
☞
To cancel the locking of all operating buttons
(OPERATION)
Press any single button.
A buzzer will sound and the code number
request message will appear.
Note: If no action is taken, the code
number request message will
disappear after 10 seconds.
1
1
SECURITY CODE ----
SECURITY CODE ----
SECURITY CODE ----
SECURITY CODE ¤¤¤¤
SECURITY CODE ----
SECURITY CODE ¤¤¤¤
Use the camera select buttons to
re-enter the code number (example:
1234) that was entered under
OPERATION “CODE”.
The buzzer will sound, the lock will be
canceled and the camera images will be
displayed.
1
2
SECURITY CODE ----
SECURITY CODE
SECURITY CODE
¤¤¤¤
¤¤¤¤
SECURITY CODE ¤¤¤¤
SECURITY CODE ----
SECURITY CODE ¤¤¤¤
SETUP setting
This lets you set a 4-digit code number to use for locking menu screen settings.
Example: To register code numbers 4, 3, 2, 1
Use the cursor button to select
SETUP “CODE 1111”, and then
press camera select buttons 4, 3, 2
and 1.
Note: Make sure that you do not forget the
code number.
Use the cursor button to select
SETUP “LOCK OFF”, use the
setting buttons to select “ON”, and
then press the MENU button.
The menu screen settings are now locked.
1
14
SETUP
CODE 1111
LOCK OFF
SETUP
CODE 4321
LOCK OFF
2
MENU
+–
SETUP
CODE 4321
LOCK OFF
SETUP
CODE 4321
LOCK ON
☞
To cancel the locking of the MENU button
(SET UP)
Press the MENU button.
A buzzer will sound and a code number
request message will appear.
Note: If no action is taken, the code
number request message will
disappear after 10 seconds.
Use the camera select buttons to
re-enter the code number (example:
4321) that was entered under
SETUP “CODE”.
The buzzer will sound and the lock will be
canceled.
Notes common to SECURITY LOCK:
•
If both the SETUP lock and the OPERATION lock are applied at the
same time, the code number request message will still appear when
the MENU button is pressed. If you enter the SETUP code number
at this time, both locks will be canceled, but if you enter the
OPERATION code number, only the OPERATION lock will be
canceled, and the SETUP lock will remain applied.
•
After the locks have been released and operations are enabled, if
you press and hold the
LIVE
button for three seconds when a
camera image is being viewed, the locking will be applied once more
with the menu in the mode that was set.
•
During playback, press the
VCR
button to engage the lock.
MENU
1
SECURITY CODE ----
SECURITY CODE ¤¤¤¤
SECURITY CODE ----
SECURITY CODE ----
SECURITY CODE ----
SECURITY CODE ¤¤¤¤
1
2
SECURITY CODE ----
SECURITY CODE ¤¤¤¤
SECURITY CODE ----
SECURITY CODE
SECURITY CODE
¤¤¤¤
¤¤¤¤
SECURITY CODE ¤¤¤¤
English
– 71 –