Filter
Top Products
4
Your device uses a rechargeable 3.7 volt lithium polymer battery of capacity 1000
mAH.
Important! The battery is included in your package, but does not come installed in
the device. Before you can use your device, you must install the included battery.
Please have the battery and a small screwdriver ready before you install the battery.
Approximately 4 hours are required to charge the battery for rst-time use.
Thereafter, your device may require up to 5 hours for a full charge. Battery power
lasts for about 1 week of normal use or 5 hours of continuous use. When you see
the low battery warning, you should recharge your battery.
Installing the Battery for the First Time
Follow these instructions to install the battery for the rst time. Note: Please
contact your local Franklin service oce to replace the battery at a later time.
1. Turn your device over.
2. Use the screwdriver to unscrew the screw until it is loose.
Warning: The screw, even when loose, is attached to the battery compartment
door and should not be removed.
3. Turn the device over and allow the battery compartment door to fall away
from the device, catching it with your hand.
4. Insert the new battery by gently connecting the clip to the clip on your
device.
Battery Information