Filter
Top Products
52
● To prevent electric shock, before changing jumper switches, turn off
the computer main and peripheral units and unplug the power cable.
● The PC is very hot immediately after being turned off. Wait about ten
minutes and reboot.
Even if passwords are set by the BIOS setup utility, they are not rendered effective until
the jumper switches are changed.
Help
If the password necessary to setup BIOS or boot the system is not known, return
JP5 to 2-3. The password check is disabled.
JP5 jumper
switch
1-2... Enables
a password.
2-3... Disables
a password.
Front
WARNING
CAUTION
1
2
3
13