Filter
Top Products
55
4
- Maximum Performance Maximize
This item reduces power consumption while degrading performance. ‘Hard Disk
Timeout’ is set to [30 minutes]; ‘Display Timeout’ to [1 hour]; and ‘Standby Timeout’ to
[1 hour], respectively.
- If this item is set [Disabled] on Windows 95/98, the computer displays the message
“Ready to Turn off power”, and its power is not automatically turned off. If this message is
displayed, you have to turn off the power.
- If “Manage computer power on Windows” is not checked in “Power properties” on the
Windows 95 control panel, the computer does not enter the power savings mode.
- Windows NT does not support power savings mode.
- This item is not available when Windows 98 runs in ACPI mode.
– Hard Disk Timeout
This item sets the time, from the time that access to the hard disk has been denied and
then the hard disk is set to power savings mode, to the time that the motor stops.
- Disabled (Initial value)
The hard disk does not enter the power savings mode.
- 30 seconds, 1 to 30 minutes
Set the time for changing the hard disk to the power savings mode and for stopping
the motor. (Initial value)
- This function requires a hard disk unit supporting power savings. (The hard disk mounted
on this personal computer supports power savings.)
- It requires several seconds for disk rotations to become stable when the hard disk
returns from the power savings mode to normal operation mode.
- This item is not available when Windows 98 runs in ACPI mode.
– Display Timeout
This item sets the time from no keyboard or mouse entry to display disappearance.
- Disabled (Initial value)
The display does not enter the power savings mode.
- 1 to 30 minutes, 1 hour
- This function requests a display unit supporting the power savings mode.
- This item is not available for Windows 98 and Windows NT.
Point
Point
Point