Chapter 2 ETERNUS DX Disk Storage System Installation
2.3 Package Size
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning-
Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0
35
2.3 Package Size
The ETERNUS DX Disk storage system is shipped in cardboard boxes. These boxes may not fit through some
doorways or elevators. To make sure that the ETERNUS DX Disk storage system can be moved to the
installation site, carefully check the transport route information. Refer to "2.1 Installation Specifications"
(page 27) for the maximum weight of each enclosure.
The following table shows the package size and the maximum package weight of each component for regions
other than EMEA&I.
Table 2.3 Package size (for regions other than EMEA&I)
*1: When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the drives
preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual
package.
Component Package size (W × D × H) Maximum weight (approx.)
Controller enclosure
2.5" type 600 × 760 × 240mm 40kg
3.5" type 600 × 780 × 240mm 40kg
Drive enclosure
2.5" type 600 × 660 × 240mm 40kg
3.5" type 600 × 670 × 240mm 40kg
Drive (*1)
2.5" 160 × 278 × 106mm 0.5kg
3.5" 189 × 300 × 116mm 1.0kg
Power distribution unit
1U 570 × 710 × 160mm 4kg
2U (390 × 590 × 180mm) × 2 (7kg) × 2