Fujitsu DX80 S2 Computer Drive User Manual


 
Chapter 3 Connections
3.3 LAN Connection
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning-
Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0
55
3.3 LAN Connection
The ETERNUS DX Disk storage system requires a LAN connection for operation management.
In addition, information such as ETERNUS DX Disk storage system failures is notified to the remote support
center.
Figure 3.12 Example of a LAN connection
When using ETERNUS Web GUI to manage operations, prepare a Web browser in the administration terminal.
The following table shows the supported Web browsers.
Table 3.3 ETERNUS Web GUI operating environment
When using ETERNUS Web GUI to connect the ETERNUS DX Disk storage system, the default port number is 80
for http.
The LAN port for operation management on the ETERNUS DX Disk storage system uses Ethernet (1000Base-T /
100Base-TX / 10Base-T) for the interface. IPv4 and IPv6 are supported as Internet Protocols.
Make sure to connect each controller to the LAN for operation management.
Software Guaranteed operating environment
Web browser Microsoft Internet Explorer 7.0, 8.0, 9.0, 10.0 (desktop version)
Mozilla Firefox 3.6.x, ESR 10.0.x, ESR 17.0.x
ETERNUS DX
Disk storage system
SNMP
manager
Administration terminal
- Operation
management/setting
- Wake On LAN
NTP server
Mail server
Authentication
server
Syslog server
Remote support
center