Chapter 2 ETERNUS DX Disk Storage System Installation
2.6 Outlet/Socket Specifications
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning-
Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0
38
2.6.1 Specifications for Optional Power Supply Products
This section explains the specifications of optional power cords and power related optional products.
When using power distribution units, the number of outlets that are required to connect the controller
enclosure and drive enclosures should be taken into consideration.
In addition, make sure that the plug type of the power distribution unit fits the power socket when using an
existing power socket. If the plug type does not fit the power socket, replace the socket.
■ Power cords
● Power cords supplied with the ETERNUS DX Disk storage system (for the EMEA&I region)
Table 2.4 Specifications for power cords supplied with the ETERNUS DX Disk storage system (for the
EMEA&I region)
● Power cords supplied with the ETERNUS DX Disk storage system (for regions other than EMEA&I)
Table 2.5 Specifications for power cords supplied with the ETERNUS DX Disk storage system (for regions
other than EMEA&I)
● Optional AC100V and AC200V power cords (for regions other than EMEA&I)
Optional power cords are used to connect devices with the IEC60320-C13 power socket type. These power
cords can be used to connect devices with the AC100V and AC200V specifications.
Table 2.6 Specifications for optional power cords (for regions other than EMEA&I)
Usage Plug type Socket type Cable length Remarks
Used for connection between the
ETERNUS DX Disk storage system
and the socket (IEC60320-C13 ↔
IEC60320-C14G)
IEC60320-C14G IEC60320-C13 2.5m 250V 10A
Usage Plug type Socket type Cable length Remarks
Used for connection between the
ETERNUS DX Disk storage system
and the socket
(IEC60320-C13 ↔
NEMA L6-15P)
NEMA L6-15P NEMA L6-15R 4.0m 250V 15A
(Normal usage
<12A)
Usage Plug type Socket type Cable length Remarks
Used for connection between the
ETERNUS DX Disk storage system
and the socket
(IEC60320-C13 ↔
IEC 60320-C14)
IEC60320-C14 IEC60320-C13 3.0m 250V 10A
(Normal usage <8A)