Filter
Top Products
14
2.2 Connecting Your Computer to ScanSnap!
Follow the procedure below to connect your computer to ScanSnap!.
1. Connect ScanSnap! to the power outlet using the AC cable.
2. Connect your computer to ScanSnap! using the USB cable.
The following describes each of the above two procedures.
■ Connecting the AC Adapter
Connect the power cable by the following procedure.
1. Connect the AC cable to the AC adapter.
2. Connect the connector of AC adapter to the AC adapter connector on ScanSnap!.
3. Insert the AC cable into the power outlet.
ATTENTION
Be sure to connect the AC cable first before connecting the USB cable.
AC adapter connector