Filter
Top Products
6.3 Cleaning the ADF
ScanSnap! fi-4110EOX2 Operator's Guide 67
DAILY CARE
6
6.3 Cleaning the ADF
Clean the ADF with a cloth moistened with cleaner F1.
As a guideline, clean the ADF after every 1,000 scans. Note that this guideline varies according to
the type of document you are scanning. For example, the ADF must be cleaned when a fewer num-
ber of documents have been scanned when toner has not sufficiently been fixed on the printout.
Clean the ADF according to the following procedure referring to the illustrations on the following
page.
The glass surface inside the ADF becomes hot during use of the scanner.
Before you start to clean inside the scanner, disconnect the AC adapter from the outlet, and
wait at least 15 minutes for the scanner to cool down.
1. Open out the ADF while lifting up the cover open lever.
ADF
Cover open lever